The ending address of the IP range can be entered here. If you leave this field blank, the ending address of the range added will be the same as the starting address.
The starting address of the IP range can be entered here.
To remove the selected IP address ranges from the list, click here.
To remove the selected IP address ranges from the list, click here. Not available because you have not selected any IP address ranges from the list.
To add the IP address range entered to the list, click here.
To add the IP address range entered to the list, click here. Not available because you have not entered an IP address range.
This is the list of IP address ranges that connections for this service will be denied or allowed from.
To only allow connections for this service from the IP address ranges listed, click here.
To deny connections for this service from the IP address ranges listed, click here.
To select the service you want to specify IP restrictions for, click here.
To remove the selected entries from the list, click here.
To remove the selected entries from the list, click here. Not available because you have not selected any entries in the list.
To add this entry to the list click here.
To add this entry to the list click here. Not available because you have not entered a domain and IP range.
Enter the end address of the IP range to allow relaying for this domain here.
Enter the start address of the IP range to allow relaying for this domain here.
Enter the domain to relay for here. * can be used as a wildcard.
Enter the domain to relay for here. Not available because you have specified that you are adding local domains.
To specify that you want to add an entry for a specific domain, click here.
To specify that you want to add an entry for local domains, click here. Local domains are domains configured in the EIMS domains window, and aliases of those domains.
This is a list of IP ranges and domains that unauthenticated relaying is allowed from.
To remove the selected domains from the list click here.
To remove the selected domains from the list click here. Not available because you have not selected any domains from the list.
To add the domain to the list, click here.
To add the domain to the list, click here. Not available because you have not entered a domain.
To add a domain that EIMS will act as a backup MX for, enter it here. * can be used as a wildcard.
This is a list of domains EIMS will act as a backup MX for.
The host to route to or the file path to save to can be entered here.
The host to route to or the file path to save to can be entered here. Not available because you have not selected a domain from the list.
The type of mail route can be selected here.
The type of mail route can be selected here. Not available because you have not selected a domain from the list.
The domain name selected can be edited here.
The domain name selected can be edited here. Not available because you have not selected a domain from the list.
To remove the selected domain from the list, click here.
To remove the selected domain from the list, click here. Not available because you have not selected a domain from the list.
To add a new domain to the list, click here.
This is the list of domains that have an alternate route specified for them.
Enter the maximum number of recipients per message here. Not available because you have not selected a domain from the list.
Enter the maximum number of recipients per message here.
Enter the maximum number of recipients per message here. Not available because you have not turned on the limit on recipients per message.
To turn on the limit on recipients per message for this domain, click here. Not available because you have not selected a domain from the list.
To turn off the limit on recipients per message for this domain, click here.
To turn on the limit on recipients per message for this domain, click here.
To turn on sending of ETRN commands when connecting to servers for this domain, click here. Not available because you have not selected a domain from the list.
To turn off sending of ETRN commands when connecting to servers for this domain, click here.
To turn on sending of ETRN commands when connecting to servers for this domain, click here.
To specify that messages for this domain are held until an ETRN for that domain is received, click here.
To specify that messages for this domain are held until an ETRN for that domain is received, click here. Not available because you have not selected a domain from the list.
The time interval for sending messages can be entered here. Not available because you have not selected a domain from the list.
The time interval for sending messages can be entered here.
The time interval for sending messages can be entered here. Not available because you have not selected the queue periodically option.
To specify that messages for this domain are sent periodically, click here.
To specify that messages for this domain are sent periodically, click here. Not available because you have not selected a domain from the list.
The interval that messages are to be requeued after can be entered here. Not available because you have not selected a domain from the list.
The interval that messages are to be requeued after can be entered here.
The interval that messages are to be requeued after can be entered here. Not available because you have not selected the retry after interval option.
To specify that messages for this domain are requeued after an interval, click here.
To specify that messages for this domain are requeued after an interval, click here. Not available because you have not selected a domain from the list.
The expiry time for messages to the selected domain can be entered here.
The expiry time for messages to the selected domain can be entered here. Not available because you have not selected a domain from the list.
The timeout interval for connections to this domain can be entered here.
The timeout interval for connections to this domain can be entered here. Not available because you have not selected a domain from the list.
The domain name selected can be edited here.
The domain name selected can be edited here. Not available because you have not selected a domain from the list.
To remove the selected domain from the list, click here.
To remove the selected domain from the list, click here. Not available because you have not selected a domain from the list.
To add a new domain to the list, click here.
This is the list of domains that have sending settings specified for them.
To specify the TCP port number used by default to connect to NotifyMail clients, enter the number here. The default port is 79.
To specify the maximum number of outgoing SMTP connections, enter the number here.
To specify the maximum number of ACAP connections from the same host at the same time, enter the number here.
To specify the TCP port number for ACAP connections, enter the number here. The default port is 674.
To specify the timeout interval for ACAP connections, enter the number here.
To specify the maximum number of ACAP connections here, enter the number here.
To specify the maximum number of LDAP connections from the same host at the same time, enter the number here.
To specify the maximum number of LDAP connections from the same host at the same time, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the TCP port number for LDAP connections, enter the number here. The default port is 389.
To specify the TCP port number for LDAP connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the timeout interval for LDAP connections, enter the number here.
To specify the timeout interval for LDAP connections, type the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of LDAP connections here, enter the number here.
To specify the maximum number of LDAP connections here, type the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of Ph connections from the same host at the same time, enter the number here.
To specify the maximum number of Ph connections from the same host at the same time, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the TCP port number for Ph connections, enter the number here. The default port is 105.
To specify the TCP port number for Ph connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the timeout interval for Ph connections, enter the number here.
To specify the timeout interval for Ph connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of Ph connections here, enter the number here.
To specify the maximum number of Ph connections here, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of SMTP submit connections from the same host at the same time, enter the number here.
To specify the TCP port number for SMTP submit connections, enter the number here. The default port is 587.
To specify the timeout interval for SMTP submit connections, enter the number here.
To specify the maximum number of SMTP submit connections, enter the number here.
To specify the maximum number of SMTP connections from the same host at the same time, enter the number here.
To specify the TCP port number for SMTP connections, enter the number here. The default port is 25.
To specify the timeout interval for SMTP connections, enter the number here.
To specify the maximum number of SMTP connections, enter the number here.
To specify the maximum number of change password connections from the same host at the same time, enter the number here.
To specify the TCP port number for change password connections, enter the number here. The default port is 106.
To specify the timeout interval for password changer connections, type the number here.
To specify the maximum number of password changer connections, type the number here.
To specify the maximum number of IMAP4 connections from the same host at the same time, enter the number here.
To specify the maximum number of IMAP4 connections from the same host at the same time, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the TCP port number for IMAP4 connections, enter the number here. The default port is 143.
To specify the TCP port number for IMAP4 connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the timeout interval for IMAP4 connections, enter the number here. The timeout for IMAP4 should be 1800 seconds or more.
To specify the timeout interval for IMAP4 connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of IMAP4 connections, enter the number here.
To specify the maximum number of IMAP4 connections, enter the number here. Not available because you are connected to a server running EIMS Light.
To specify the maximum number of POP3 connections from the same host at the same time, enter the number here.
To specify the TCP port number for POP3 connections, enter the number here. The default port is 110.
To specify the timeout interval for POP3 connections, enter the number here.
To specify the maximum number of POP3 connections, enter the number here.
To have EIMS include the body with the headers a message when it can't be delivered, click here.
To have EIMS only bounce the headers of a message when it can't be delivered, click here.
To stop EIMS from adding missing address headers, click here. From and To headers are being added if there are none.
To have EIMS add missing address headers, click here. From and To headers will be added if there are none.
To stop EIMS from expanding incomplete addresses in message headers, click here. Incomplete addresses with only a partial domain have the default expansion domain added, and addresses with no domain have the default domain added.
To have EIMS expand incomplete addresses in message headers, click here. Incomplete addresses with only a partial domain have the default expansion domain added, and addresses with no domain have the default domain added.
To stop EIMS from expanding incomplete SMTP addresses, click here. Incomplete addresses with only a partial domain have the default expansion domain added, and addresses with no domain have the default domain added.
To have EIMS expand incomplete SMTP addresses, click here. Incomplete addresses with only a partial domain have the default expansion domain added, and addresses with no domain have the default domain added.
To enable SMTP VRFY commands, click here. The VRFY command is used to verify the existance of a local address.
To disable SMTP VRFY commands, click here. The VRFY command is used to verify the existance of a local address.
To enable SMTP EXPN commands, click here. The EXPN command returns a list of the addresses in a group or mailing list.
To disable SMTP EXPN commands, click here. The EXPN command returns a list of the addresses in a group or mailing list.
To specify the maximum message size limit, type the number here.
To specify the maximum message size limit, type the number here. Not available because you have not turned on the maximum message size limit.
To turn off the maximum message size limit, click here.
To turn on the maximum message size limit, click here.
To specify the minimum free disk space limit, type the number here.
To specify the minimum free disk space limit, type the number here. Not available because you have not turned on the minimum free disk space limit.
To turn off the minimum free disk space limit, click here.
To turn on the minimum free disk space limit, click here.
To specify the maximum sending error log size, type the number here.
To specify the maximum sending error log size, type the number here. Not available because you have not turned on the size limit.
To turn off the maximum size limit for the sending error log, click here.
To turn on the maximum size limit for the sending error log, click here.
To specify the maximum error log size, type the number here.
To specify the maximum error log size, type the number here. Not available because you have not turned on the size limit.
To turn off the maximum size limit for the error log, click here.
To turn on the maximum size limit for the error log, click here.
To specify the maximum mail log size, type the number here.
To specify the maximum mail log size, type the number here. Not available because the maximum size limit is turned off.
To turn off the maximum size limit for the mail log, click here.
To turn on the maximum size limit for the mail log, click here.
The default expansion domain can be edited here. The default expansion domain is appended to any partially qualified domain names.
To select a different section of the preferences to edit, click here.
To close the preferences window without saving any changes, click here.
To save changes and close the preferences window, click here.
